WAN >>
Internet Access
WAN
2
PPPoE
Static or Dynamic IP
PPTP
/
L2TP
IPv6
Static or Dynamic IP (DHCP Client)
Enable
Disable
ISDN Dial Backup Setup
Dial Backup Mode
None
Packet Triggering
Always On
Keep WAN Connection
Enable PING to keep alive
PING to the IP
PING Interval
minute(s)
WAN Connection Detection
Mode
ARP Detect
Ping Detect
Always On
Strict ARP Detect
Primary Ping IP
Secondary Ping IP
Ping Gateway IP
TTL
Ping Interval
second(s)
Ping Retry
times
MTU
(
Max
:1500)
Path MTU Discovery
RIP Protocol
Enable RIP
Bridge Mode
Enable Bridge Mode
Enable Full Bridge Mode
Enable Firewall
Bridge Subnet
LAN1
LAN2
LAN3
LAN4
LAN5
LAN6
LAN7
LAN8
TTL
Change the TTL value
Enable
Disable
WAN IP Network Settings
Obtain an IP address automatically
Router Name
*
Domain Name
*
DHCP Client Identifier
*
Username
Password
Specify an IP address
IP Address
Subnet Mask
Gateway IP Address
Default MAC Address
Specify a MAC Address
MAC Address
:
¡P
¡P
:
¡P
¡P
DNS Server IP Address
Primary IP Address
Secondary IP Address
*:
Required for some ISPs
Note:
1.
If enable firewall in bridge mode, IPv6 connection type would be change to DHCPv6 mode.
2.
Bridge Subnet cannot be selected by Multi-WAN Interface at the same time.
3.
If both Bridge Mode and Firewall are enabled, the settings under User Management will be ignored.
4.
Full Bridge Mode supports forwarding packets with VLAN tags.
5.
Full Bridge Mode doesn't support wireless LAN.