ACS and CPE SettingsExport Parameters
Tr069 Disable   Enable

ACS Server
URL
Username
Password
  Event Code 
Last Inform Response Time :

CPE Client
    Http     Https
     Note: Https mode only works when Vigor ACS SI is 1.1.6 and above version.
     URL
     Port
     Username
     Password
Periodic Inform Settings
 Disable
 Enable
     Interval Time second(s)
     Schedule Time
         Date (yyyy-mm-dd) - -
         Time (hh:mm:ss) : :
Apply Settings to APs


Please note that the Vigor router will send the WAN or Internet IP address of the router, and the LAN clients' information (such as IP and MAC addresses) to the VigorACS server.
Please contact your service provider if you have any question.

  
 Disable
 Enable
     AP Password
 Apply Specific STUN Settings to APs
     Disable
     Enable
         Server Address
         Server Port
         Minimum Keep Alive Period second(s)
         Maximum Keep Alive Period second(s)
Bandwidth Utilisation Notification Settings
 Disable
 Enable
Time Period   

Note: Please turn off Hardware Acceleration in the router to receive Alerts Notifications, and accuracy of Bandwidth data.
WAN____Threshold Level_____________Line Speed_________
Note: If "Apply Specific STUN Settings to APs" is enabled, router STUN Settings would be discarded.