WDS Settings | Set to Factory Default | Mode: DisableBridgeRepeater Security: Disable WEP Pre-shared Key WEP: Use the same WEP key set in Security Settings. Encryption Mode : 64-bit 128-bit Key index : 1 2 3 4 The key index is fixed if the security mode is not "WEP Only". Key : The key format is the same as the one used in Security Settings. Pre-shared Key: Type: TKIP DrayTek WPA WPA WPA2 Key : Note: WPA and WPA2 are not compatible with DrayTek WPA. Type 8~63 ASCII characters or 64 hexadecimal digits leading by "0x", for example "cfgs01a2..." or "0x655abcd....". Bridge Enable Peer MAC Address     : : : : :     : : : : :     : : : : :     : : : : :     : : : : :     : : : : : Note: Disable unused links to get better performance. Repeater Enable Peer MAC Addess     : : : : :     : : : : :     : : : : :     : : : : : Access Point Function: Enable Disable Status: Send "Hello" message to peers. Note: The status is valid only when the peer also supports this function.