System Maintenance >> Management

IPv4 Management SetupIPv6 Management SetupLAN Access Setup
Router Name                
Default:Disable Auto-Logout
Enable Validation Code in Internet/LAN Access
Internet Access Control
Allow management from the Internet
    Domain name allowed 
    FTP Server
    HTTP Server Enforce HTTPS Access
    HTTPS Server
    Telnet Server
    TR069 Server
    SSH Server
    SNMP Server
Disable PING from the Internet
Apply to Interface
Loopback Interface
Enable Loopback Interface 
Note:
1. Management from WAN only available using Loopback IP, the WAN IP will not respond.
2. Source IP used for TR069,NTP,RADIUS/TACACS+,SYSLOG,SNMP.
Access List from the Internet
 Apply Access List to PING
ListTypeIndexDescription
1
2
3
4
5
6
7
8
9
10
Note:
1Access list type: Hostname, single IP address supported for corresponding domain name.
Management Port Setup
 User Define Ports  Default Ports
Telnet Port (Default: 23)
HTTP Port (Default: 80)
HTTPS Port (Default: 443)
FTP Port (Default: 21)
TR069 Port (Default: 8069)
SSH Port (Default: 22)
Note:
Ports 8001 and 8043 are used for Hotspot Web Portal.
Port Knocking for Local Service
Enable Port Knocking protection
Brute Force Protection
Enable Brute Force login protection
    FTP Server
    HTTP Server
    HTTPS Server
    Telnet Server
    TR069 Server
    SSH Server
    VPN Server
    Maximum login failures times
    Penalty period seconds
Blocked IP List
TLS/SSL Encryption Setup
Enable TLS 1.2
Enable TLS 1.1
Enable TLS 1.0
Enable SSL 3.0
AP Management
Enable AP Management
Device Management
     Respond to external device